Nikon Z 70-200/f2.8 S VR lens foot replacement

 Nikon Z 70-200/f2.8 S VR lens Arca type foot replacement with Quick Detach socket to attached a standard push-button QD mount.

• 4.3 inches long
• 1.50 inches wide
• 1.18 inches thick
• Weight: 3.0 oz (84g)
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens foot replacement

 Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens. Foot incorporate Two Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. 

• 6.655 inches long.
• 1.73 inches wide.
• 1.175 inch height.
• 1/4-20 tapped hole
• Two QD ( Quick Detach ) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Nikon Z 800mm f/6.3 VR S Lens foot replacement

 Foot replacement for Nikon NIKKOR Z 800mm f/6.3 VR S Lens.

• 6.655 inches long.
• 1.73 inches wide.
• 1.175-inch height.
• 1/4-20 tapped holes
• Two QD (Quick Detach) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum.
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface
• 
  
  
  
  
  
  
  
  
  
  
  

Focus Stack Rail

 Linear motion lead screw  micro rail. The bottom rail (10 inch long) include Arca Swiss compatible dovetail that works with Arca Swiss type clamp while the slider is equipped with quick release arca type clamp. Clamp can be oriented in 4 different positional in 90 degree increments. Camera to subject distance can be adjusted in fine increments. Lead screw delivers 1.06 mm of travel per full revolution. Fast positioning can be done by pressing slider release button and slide the slider to required position. Maximum travel distance 4.3 inch (110mm).

Modular Lens support in action

David Jang send me few pictures with new modular lens support attached to his 500mm/F4.00 canon lens .
He used 1.00 inch clamp and 2 inch lens support bracket.

 This combination let him revers lens hood for storage after removing supporting bracket.  Clamp stay mounted to 8 inch rail all the time