Arca Clamp with Stainless Steel QD insert

Use the centered QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates , L brackets or Foot Replacements. Straps are available at eBay, Amazon, Cabala's, Bass Pro and other stores with sporting fishing and military equipment.

 

 Long Camera Plates available.

 Multi-Function Arca Swiss Type camera rail available. 8-10 and 12 inch long rail (other lengths available) for your camera that will also allow you to attach multiple accessories at the same time.

• Cable management hook for tethering, microphone, monitor, HDMI, and lighting cables
• Multiple 1/4"-20 taped hole and one 3/8"-16 threads for accessory mounting.
• Arca-Swiss compatible square section for quick 90˚ position switching
• Rail incorporates a double dovetail. You can mount arca clamps on each side 
• Captive style ¼-20 camera screw slot, extended length for accurate positioning and optimal balance
• Scale markings on both sides for precise adjustments
• 1.5 inch wide
• 1/2  inch thick.
• Multiple 1/4"-20 taped hole and one 3/8"-16 threads for accessory mounting.
• Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Stainless steel hardware.
• Made in USA
• Black anodized surface.
• 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

Nikon Z 70-200/f2.8 S VR lens foot replacement

 Nikon Z 70-200/f2.8 S VR lens Arca type foot replacement with Quick Detach socket to attached a standard push-button QD mount.

• 4.3 inches long
• 1.50 inches wide
• 1.18 inches thick
• Weight: 3.0 oz (84g)
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Low Profile Arca type foot for Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S lens

 Low Profile Arca type foot for Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S lens.  Quick Detach socket build in to attached a standard push-button QD mount. 

• 4.3 inches long
• 1.50 inches wide
• 0.6 inches thick
• Weight: 2.2 oz (64g)
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

• 
  

Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens foot replacement

 Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens. Foot incorporate Two Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. 

• 6.655 inches long.
• 1.73 inches wide.
• 1.175 inch height.
• 1/4-20 tapped hole
• Two QD ( Quick Detach ) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Focus Stack Rail

 Linear motion lead screw  micro rail. The bottom rail (10 inch long) include Arca Swiss compatible dovetail that works with Arca Swiss type clamp while the slider is equipped with quick release arca type clamp. Clamp can be oriented in 4 different positional in 90 degree increments. Camera to subject distance can be adjusted in fine increments. Lead screw delivers 1.06 mm of travel per full revolution. Fast positioning can be done by pressing slider release button and slide the slider to required position. Maximum travel distance 4.3 inch (110mm).