Long Camera Plates available.

 Multi-Function Arca Swiss Type camera rail available. 8-10 and 12 inch long rail (other lengths available) for your camera that will also allow you to attach multiple accessories at the same time.

• Cable management hook for tethering, microphone, monitor, HDMI, and lighting cables
• Multiple 1/4"-20 taped hole and one 3/8"-16 threads for accessory mounting.
• Arca-Swiss compatible square section for quick 90˚ position switching
• Rail incorporates a double dovetail. You can mount arca clamps on each side 
• Captive style ¼-20 camera screw slot, extended length for accurate positioning and optimal balance
• Scale markings on both sides for precise adjustments
• 1.5 inch wide
• 1/2  inch thick.
• Multiple 1/4"-20 taped hole and one 3/8"-16 threads for accessory mounting.
• Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Stainless steel hardware.
• Made in USA
• Black anodized surface.
• 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens foot replacement

 Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens. Foot incorporate Two Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. 

• 6.655 inches long.
• 1.73 inches wide.
• 1.175 inch height.
• 1/4-20 tapped hole
• Two QD ( Quick Detach ) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Nikon Z 800mm f/6.3 VR S Lens foot replacement

 Foot replacement for Nikon NIKKOR Z 800mm f/6.3 VR S Lens.

• 6.655 inches long.
• 1.73 inches wide.
• 1.175-inch height.
• 1/4-20 tapped holes
• Two QD (Quick Detach) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum.
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface
•