Wednesday, February 23, 2011
I will have same new rails listed in my store in next few days.
Lets start with 12 inch rail 5/8 thick. It is long overdue.
12.00 inch long
1.5 inch wide
5/8 inch thick.
Weight 6.1 oz (174g).
Hole in front for lens support or other accessories. (1/4-20 tap hole)
Three captive style slots.
Plate incorporates a double-dovetail.
Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
Made from 6061-T6 Aluminum.
Wednesday, February 9, 2011
Quick Release Screw-Knob 2.375 inch clamp with dual mounting and captive style knob. It is improved version of my F001 clamp
1)tongue and grove instead of pins,
2)white index lines
3) additional hole on back to improve aligning with E031 and E032 rails
This is part F010
Tuesday, February 8, 2011
I did finally receiver my first batch of L bracket for Nikon D7000.
It is 3 part design ( let me keep material cost down) Base plate , 90 degree connecting angle and Side plate. Long center mounting slot let you move L bracket about 1 inch away from camera and connect to your computer if you are using tethered shooting mode. If you don't need L bracket you can remove side plate together with connecting block and use it as standard arca type camera plate.
I always need few people wiling to test new product. If you are one of them please contact me.
I can provide part and pay postage. If you like it and decide you want to keep it we can work something out.
Update to L bracket