Hejnar Photo: 6 inch rail with integrated clamp

Sunday, February 12, 2012

6 inch rail with integrated clamp

Rail incorporate two safety stop screws , bubble level, one captive style slot and one 1/4-20 tape hole.

Two clamping surfaces tap and bottom. Rail can be used as nodal slide or mount for flash brackets.

Model E003. Scale on each side

2 comments:

Mauro Morando said...: Why without scale?

Mauro Morando; March 21, 2012 at 7:07 AM
Chris said...: Scale can be added if needed.
No additional charge. Let me know if you interested.; March 21, 2012 at 7:39 AM

Welcome

This blog was created for all of you asking me questions and sending me suggestion about equipment I design and make. I simple cannot check all user groups and answer questions asked there. ( it also not permitted in same user group) It is so many of them and sometimes questions are very similar. I will try as much as my time permits post info about new products and ideas and also answer your questions if you have one. Products are sold through my store hejnarphotostore.com (You can use credit card or pay pal) or e-bay http://stores.ebay.com/Hejnar-Photo.