I have been working on universal L bracket for last few weeks. First bracket is for very small DSRL , 3/4 cameras (Panasonic Lumix GH2, G3, GF1, Olympus EP-2 etc) and large P&S. It is 2 part design as any other L bracket made by me. When project is finish I will have three or four sides available and the same number of base plates. Side and base can be interchangeable between each other. You can select long base rail and very short side or any other combination working with your equipment. The elongated captive style slot cut in base plate let you move L bracket away from camera and connect to your computer if you are using tethered shooting mode. If you don't need L bracket you can remove side and use it as standard arca type camera plate. Base plate is equiped with two soft tiped screws. Soft tip screws will press base plate against mounted surface and prevent plate or L bracket from twisting.
3.625 inch long, 2.375 height, Weight 3.1 oz (88 g)