Base rail is 8 inch long and does include arca swis style connection on one side. Slider is 6 inch long and can overhang 4.25 inch past base rail if needed. Slider can be positioned on base rail with support part up if you have enough room between lens and rail, or in situation when clearance between lens and rail is limited it can face down to make space between lens and base rail.
Clear aluminum knob is 5/8 inch tall. You will need at list 0.875 inch clearance between bottom of lens foot and lens itself. If you have less than that knob may interference with your lens. End of slider is equipped with small clamp ( F012). This let you adjust LSB ( Lens Support Bracket ) high on the fly in the field without any additional tools or wrenches. Lens foot is mounted to Base rail with captive style 3/4 inch length screws.
I will have similar system with two side length adjustment ( 3 inch per side) ready soon....
No comments:
Post a Comment