Quick connect panorama set for mirrorless and 4/3 cameras

Mmulti row panorama package for 4/3 and mirrorlles camera. Package include 6 inch horizontal rail with bubble level , 5 inch vertical rail and 4 inch nodal slide. Modular design let you quickly assemble horizontal and vertical rail to each other simply and securely without tools. Connection is solid and rails cannot twist or slip apart. Knob is captive, it cannot be lost in the field. In addition to items included in this package you will need two panning clamp to complete set up.
The clamp on nodal slide may be oriented in 90° increments at the end of the rail depending on the orientation of the camera QR plate you own.

Manfrotto 410 Extended adapter plate for Arca Swiss

Manfrotto 410 conversion plate. This is extended version.  Clamp center is located on Manfrotto 410 camera/lens mount axis and it is the same as the head panning base. In other words, if you look down through the 3/8 mount hole on the 410 it is the exact center of the bottom panning control. When the head is panned both the head and camera/lens rotate around the same axis. For distant subjects original Manfrotto arrangement for this gear head is just an inconvenience. But for critical panoramic or most especially macro work this is a killer and makes the 410 useless. Using this adapter plate/clamp combination you can enjoy your pano and macro photography again.

Plate Specification:

• 4.550 inch long.
• 2.560 inch wide.
• 0.625 inch thick.
• Weight 3.6 oz (180 g)

Available in my store

Manfrotto 808 3-Way Pan/Tilt Head Conversion set

Fallowing conversion set for Manfrotto 405 and 410 gear head I did machine similar plate for Manfrotto 808   3-Way Pan/Tilt Head. This combination of plate and clamp (F63) will let you use Manfrotto  head with any arca swiss equipment.
After removing lock down level on 808 head you can connect conversion plate using two 10-32 flat head screws.
Clamp at top of conversion plate can be oriented in three different direction. It can not be oriented with knob  facing bubble level.

available in my store 

Manfrotto 057 Magnesium Ball Head Arca Swiss Clamp

Clamps for Manfrotto 057 Magnesium Ball Head
It will also works with  Manfrotto  054, 055 Mag Ball Head and  Manfrotto M496 and M498.
Clamp will let you use any arca type equipment with Manfrotto ball head.
Clamp Specification:.

• 2.6 mm deep relief grooves guarantee compatibility with most plates/rails.
• Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops
• Knob is captive. Knob stops at maximum opening - cannot be lost in the field
• Back side has grove to match ball heads post and preventing it from twisting.
• Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
• Stainless steel hardware.
• Black hard coat anodized surface
• Made in USA

Smaller 2.375 inch clamp weight 4.9oz (135g) 

Bigger 3.25 inch clamp weight  6.2oz (176g)

Available in my store