Arca Clamp with Stainless Steel QD insert

Use the centered QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates , L brackets or Foot Replacements. Straps are available at eBay, Amazon, Cabala's, Bass Pro and other stores with sporting fishing and military equipment.

 

Nikon Z 70-200/f2.8 S VR lens foot replacement

 Nikon Z 70-200/f2.8 S VR lens Arca type foot replacement with Quick Detach socket to attached a standard push-button QD mount.

• 4.3 inches long
• 1.50 inches wide
• 1.18 inches thick
• Weight: 3.0 oz (84g)
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Low Profile Arca type foot for Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S lens

 Low Profile Arca type foot for Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S lens.  Quick Detach socket build in to attached a standard push-button QD mount. 

• 4.3 inches long
• 1.50 inches wide
• 0.6 inches thick
• Weight: 2.2 oz (64g)
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

• 
  

Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens foot replacement

 Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens. Foot incorporate Two Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. 

• 6.655 inches long.
• 1.73 inches wide.
• 1.175 inch height.
• 1/4-20 tapped hole
• Two QD ( Quick Detach ) socket build in
• Weight 6.0 oz (170 g)
• Double-dovetail design allows for dual clamping surfaces on rail
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Dual side clamp with Independent jaws

Double side clamp with independent jaws movements. This clamp works with rails with different width dimension and from different manufactures. If you use identical rails they will aligning with clamp center on each side. International standard dove-tail clamping, compatible with Arca-Swiss type rails.

2.375 inch long
Weight 137g
Two safety stop relief grooves on each side. This prevents free fall when the clamp is not fully closed and your plate has safety stops
Center socket is countersunk on one side for 1/4-20 or M6 screw, but also threaded 3⁄8”-16.
Made from 6061-T6 Aluminum.
Black hard coat anodized clamp and clear anodized knob.
Made in USA