Monopod head.( HEJZAL line ) is few days away from being finish. I just have to assembly them
Clamp can be mounted on Head in three different orientation with knob on left or right. ( parallel to to the tilt orientatione) and with clamp knob on back. If you have to switch clamp orientation all you have to do is to release center screws (1/4-20) few turns, and then rotate clamp to desired position ..
MH can be mounted directly on 3/8-16 stud found in most monopods. If you need 1/4-20 connection you will need reducing bushing. Bushing when not needed is store on monopod head itself . They are two round openings under clamp to the left and right of center axis for that purpouse. Monopod head is equiped with Hejzal line of clamp. HejZal clamp is equiped with wrench storage, wrench cab be locked in the clamp body, so there is no need to carry screw driver or wrench in your pocket.
Features an Arca Swiss compatible bidirectional dovetail on foot to add versatility. MH can be place in any arca swiss clamp in any direction.
Specification:
Weight 14.5 (411g) with clamp
1.5 inch wide square base
Height 3.625 inch
Mounting 3/8-16 socket on base
Bidirectional dovetail design on base
No comments:
Post a Comment