8 inch heavy duty vertical rail

To build vertical rail you will need 3 components:

1)  G021-80 multipurpose rail. G21-80 is 8" long by 5/8" thick, with one  full length captive slot. Decimal scale from 0 to 16cm divided in 1mm increments engraved on each side.

2) G103 Connector block

3)F68 dual captive slots clamp 

Nikon D7100 L bracket available

L bracket Specification

• 3.8750 inch long
• 3.062 height
• 1.6 inch wide
• Weight 3.8 oz. (109 g)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
• Stainless steel hardware.
• Black hard coat anodized surface.
• Made in USA
• Used with Nikon D7100.
• Left side door cannot be accessed with this bracket mounted against camera. If you need access to any port on left side you have to slide L bracket away from camera L bracket can be disassembled and use as camera plate only if needed and each oz. matter. You have to remove one screw and you are done

As usually two parts design

Sony Nex 6 L bracket available

Sony NEX  6 L bracket specifications :

• 3.375 inch long
• 2.45 height
• 1.5 inch wide
• Weight 2.3oz (66 g)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates..
• Stainless steel hardware.
• Made in USA
• Black hard coat anodized surface.
• L bracket can be disassembled and use as camera plate only if needed.
  
  
  
  
  
  
  
  
  
  

Arca swiss type clamp for Manfrotto 244 Variable Friction Magic Arm.

Manfrotto 244 Variable Friction Magic Arm.is very handy tool. Small change to current clamps design will now let me use it with any arca swiss rail and plates.

Specs for this clamp:

• 2.375 inch long
• Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not closed.
• 2.6mm deep relief grooves guarantee compatibility with most plates/rails.
• Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops
• Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
• Tongue-in-pocket Design -Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
• Stainless steel hardware.Black hard coat anodized clamp and clear anodized knob.
• Made in USA