Monday, November 29, 2010
Wednesday, November 24, 2010
Custom Parts
He is using a Gitzo Explorer tripod and Markins M10 ballhead. He want to be able to set the ballhead in the normal position (like it would on a normal tripod)but with the explorers arm set in the horizontal position.
Once a while i do have request for custom parts. Same parts are easy to make some much more complicated. If you need a part not listed in my auctions I can usually make it. All I need is some input from you. It takes time to design and machine part. Anodizing process required another week or two. Please expect 45-60 days for such project.
If you want to know how much will it cost I have to know what will need to be done. With your input we can design new part. After that i can give you complete quote. In most cases product can also work for other costumers and I can produce more than one part. In that case you are charge only for product you are buying and not custom work. In most cases we are looking at $50-100 for plates, rails etc. If you need custom setup supporting for example Lecica M8 with 800mm lens with teleconverter and your rail need to be 24 inch long I may charge you $300.
Tuesday, November 23, 2010
Bidirectional camera or lens plate
Monday, November 22, 2010
Plates with Ridge
Friday, November 19, 2010
Panorama set
Set include two quick release 8.00 inch Multi Purpose Rail 1/2 inch thick and 90 degree connector. For users with heavy equipment where 3/8 rails are not sturdy enough. This parts connected together serve as starting point for single and multi rows panorama. Additional rail, clamps or rail with integrated clamp will be required for multi row panoramas. You will also need one or two pano clamps.
Thursday, November 18, 2010
Wednesday, November 17, 2010
Leica M8 with 800mm lens and teleconverter
Long lens Support Bracket
It can be used in combination with various long rails to improve stability as long as end of the rail has mounting hole. ( please check my store) It can be permanently mounted to rail if you are using only one lens or can be mount inside clamp if you are using it with various lenses and need to adjust height quickly. If you own long lens with foot you don't need any clamps. Rail can be mounte directly to lens foot.
Index stop bar
Tuesday, November 16, 2010
Nikor 200-400 F4.0 AFS VR VR II Replacement Foot
Welcome
Hello everyone and welcome to my blog
This blog was created for all of you asking me questions and sending me suggestion about equipment I design and make. I simple cannot check all user groups and answer questions asked there. ( it also not permitted in same user group) It is so many of them and sometimes questions are very similar. I will try as much as my time permits post info about new products and ideas and also answer your questions if you have one. As of November 2010 all products are sold through my e-bay store http://stores.ebay.com/Hejnar-Photo. If you are not e-bay member I can also send you pay pal invoice. I do not accept credit cart directly at this time only PayPal transactions.
Subscribe to:
Posts (Atom)